Do your New & Kumho Used Tires keep going flat & you have no idea why? Here are some things that you should check : 

1. Inflate your tire / wheel so it’s at 40 PSI. 

2. Either buy or make a mixture of soapy water & spray it onto your tires & wheels. 

3. Mark the areas where the bubbles appear with a tire crayon. 

4. If some leaks in the wheel are found after this is done, do the steps above to reseal the tire (: 

The main reason why a Modular Wheel / Tire leaks is because the person that is changing or changed the tire stuck their tire spoon into the silicone seal & evidently damaged it during the mounting of the tire. So just be sure you trust the person that is changing your tire (:

Off to my Grandpa’s house,
                                          Mykalanne.

Tags: Kumho Used Tires, TIre, Tires, Used Tires

This entry was posted on Monday, June 21st, 2010 at 9:58 am and is filed under Tire Information, Types of Tires. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.